Справочник Пользователя для Cybiotronics Limited 936001

 

 

Wall Mounting Base Unit 
 

The base unit can be mounted on a standard wall phone plate. 
 

1. 

Plug the DC adapter’s barrel plug into the jack marked

 “

7.5V 300mA” at the 

bottom of the base unit. 

 

2. 

Plug the telephone line cord into the jack marked “TEL. LINE”.

 

 
3. 

Hold the base unit up next to the wall jack and plug the line cord into the wall 
jack. 

 
4. 

Place the base unit on the posts of the wall plate and push down until the 
base unit is secured firmly. 

 
5. 

Plug the DC adapter into a standard wall outlet. 

 
 
Note: If you are not using a standard wall plate to mount the phone on a wall, you 
may also mount it with ordinary screws. Affix two screws on the wall, remember to 
leave 1/8 inch of the screw extending from the wall.