Справочник Пользователя для Tait International Limited TBCK4A

TB9400 Installation and Operation Manual

© Tait Limited March 2015

Certain configuration settings in the base station’s web interface require 
you to enter a port number (for example, the trunking interface and channel 
groups). 

Two ranges of port numbers are unavailable for use with the base station. 
The web interface will prevent you from entering a number from these 
ranges, as explained below.

Notice The following procedure can be carried out only if secure 
shell access (SSH) is enabled. Secure shell access to the base station is 
disabled by default from version 1.40 onwards. To enable SSH, select 
Tools > Settings > Secure shell and click Start. 

The root password to the Linux operating system of the reciter is a possible 
security risk. The equipment is delivered with a default password that is 
well known. Knowledge of the password could be used to render the 
equipment inoperable, for example by deleting files. If you are concerned 
about the security risk that this poses, change the password. If Tait provides 
support services, it may need to know the password.

Notice If you change the password and then lose it, the equipment 
must be returned to Tait. Make sure that you store the password securely 
and do not lose it. 

To change the root password, follow these steps.

1.

Log in from your PC to the base station using SSH client software 
such as PuTTY. The username is “root” and the default password is 
“k1w1”. 

2.

At the # prompt, enter the command “passwd”.

3.

Follow the on-screen instructions.

4.

Record the password in a secure location. 

0 – 1023

The “well-known ports”, commonly used by other 
devices in a network. Using a port number in this 
range could cause compatibility problems with other 
devices.

12000 – 14999

Reserved for internal use in the base station. Using a 
port number in this range could cause the base 
station to malfunction.