Справочник Пользователя для Tait Limited TMAK5D
50 Operating in MPT trunked mode
Dialling a PSTN number
If your radio has a keypad microphone installed, you may be
able to make calls to a PSTN number. For information about
entering characters using the keypad microphone, see
able to make calls to a PSTN number. For information about
entering characters using the keypad microphone, see
To dial a PSTN number:
1
Dial 0n, where n is the PSTN
number you wish to call.
number you wish to call.
Note: The numbers you dial before
the 0 depend on the way
your network operates.
your network operates.
2
Press Send or the
or PTT key.
The call details appear in the
display. While the call is being
setup, you can cancel the call by
pressing Clear.
display. While the call is being
setup, you can cancel the call by
pressing Clear.
Receiving a call
When you receive a call, your radio
displays the caller’s identity and
responds in one of two ways, depend-
ing on the way it was programmed
and the way your network operates.
displays the caller’s identity and
responds in one of two ways, depend-
ing on the way it was programmed
and the way your network operates.
■
On-air call setup: The radio gives a ring and automatically
accepts the call. The
accepts the call. The
symbol appears in the display.
■
Full off-air call setup (FOACSU): When a call is received,
the radio rings like a telephone.
To accept the call, press Answer. The radio gives a beep
and the
the radio rings like a telephone.
To accept the call, press Answer. The radio gives a beep
and the
symbol appears in the display. You may also
be able to accept the call if you briefly press the PTT key
or lift the microphone off the microphone clip.
or lift the microphone off the microphone clip.