Листовка для dreamGEAR DGWII-1284

1. Open the latch located on the front of the Racing Wheel PLUS.

2. Insert the wrist strap attached to the Wii Remote through the hole on the 

Racing Wheel PLUS and pull through.

3. Place the Wii Remote with Wii MotionPLUS into the wheel so that the 

directional button is located on the left side of the wheel.

4. Close the latch to secure the Wii Remote into the Racing Wheel PLUS.
NOTE: Use the pass-through port on the Racing Wheel PLUS to navigate 

1. Open the latch located on the front of the Racing Wheel PLUS.

2. Insert the wrist strap attached to the Wii Remote through the hole on the 

Racing Wheel PLUS and pull through.

3. Place the Wii Remote into the wheel so that the directional button is 

located on the left side of the wheel.

of the Racing Wheel PLUS.
4. Close the latch to secure the Wii Remote into the Racing Wheel PLUS.
NOTE: Use the pass-through port on the Racing Wheel PLUS to navigate 

1. Unscrew the battery compartment door (located on the bottom of the 

Quick Shot PLUS handle) using a mini-screw-driver (not included).

2. Insert 2 “AAA” batteries in the correct +/- direction and close the battery 

compartment door.

3. Screw the battery compartment door shut tightly before using.
NOTE: The power switch next to the battery compartment turns the LED & 

1. Open both latches located at the top of the Quick Shot PLUS.

2. Insert the Wii Remote into the Quick Shot PLUS by sliding it into the Wii 

Remote cradle of the Quick Shot PLUS (directional pad end first with the 

buttons facing upward).

3. Slide the directional pad end of the Wii Remote towards the front of the 

Quick Shot PLUS until it stops.

4. Close the latch that is closest to the “A” button on the Wii Remote. If you 

are playing a game that does not require the Nunchuk, close the second 

latch and you are ready to play. If your game requires the use of the 

Nunchuk, continue to step 5.

5. Through the back opening of the Quick Shot PLUS, slip the connector 

plug of the Wii Nunchuk under the back latch on the Quick Shot PLUS 

and connect the Wii Nunchuk to the Wii Remote. Make sure that the 

connector cover of the Wii Remote has been removed before inserting 

the connector plug of the Wii Nunchuk into the External Extension 

Connector of the Wii Remote.

6. Close the back latch.
Installing the Wii Remote with Wii MotionPLUS:

1. Open both latches located at the top of the Quick Shot PLUS.

2. Insert the Wii Remote into the Quick Shot PLUS by sliding it into the Wii 

Remote cradle of the Quick Shot PLUS (directional pad end first with the 

buttons facing upward).

3. Slide the directional pad end of the Wii Remote towards the front of the 

Quick Shot PLUS until it stops.

4. Close the latches on the Quick Shot PLUS. If you are playing a game 

that does not require the Nunchuk, you are ready to play. If your game 

requires the use of the Nunchuk, continue to step 5.

5. Make sure the connector cover of the Wii MotionPLUS has been 

removed and insert the connector plug of the Nunchuk into the External 

Extension Connector of the Wii MotionPLUS.

1. If the Nunchuk is attached to the Wii Remote or the Wii MotionPLUS, 

remove the Nunchuk first before trying to remove the Wii Remote from 

the Quick Shot PLUS.

instructions.
2. Open both latches located on the top of the Quick Shot PLUS and lift 

the Wii Remote up from the back and slide the Wii Remote until it is 

completely out of the Quick Shot PLUS.

PACKAGE CONTENTS:
• Racing Wheel PLUS
• Quick Shot PLUS
• User’s Guide/Warranty Card
• Registration Card