Справочник Пользователя для HP PP2080

Wired Equivalent Privacy (WEP) encryption and shared authentication provides protect for your data on the 
network. WEP uses an encryption key to encrypt data before transmitting it. Only computers using the same 
encryption key can access the network or decrypt the encrypted data transmitted by other computers. 
Authentication provides an additional validation process from the adapter to the access point.

Note: You must use the same encryption type, key index number, and WEP key as other devices on your 
wireless network. Also, if 802.1x authentication is being used, WEP encryption must be disabled. 

1.  

Select the wireless adapter in the left-side pane.

2.  

From the General page, click the Networks tab.

3.  

Select the profile from the Profile List and click the Edit button or click the Add button if you are using 
the Profile Wizard.

4.  

Click the Security tab. Select Security Settings, the third dialog if using the Profile Wizard.

5.  

Select Shared from the Network Authentication drop-down box.

6.  

Select 64-bit or 128-bit from the Encryption Level drop-down box.

7.  

Select a key index number 1, 2, 3, or 4 from the Encrypt data with key index drop-down box to use for 
encryption. Key selection corresponds to the WEP encryption pass phrase or WEP key.

8.  

Select either of the following:

●     

Pass phrase: Click Use Pass Phrase to enable it. Enter a text phrase, up to five (using 
64-bit) or 13 (using 128-bit) alphanumeric characters (0-9, a-z or A-Z), in the pass 
phrase field.

●     

WEP key: Click Use WEP Keys to enable it. Enter up to ten (using 64-bit) 
alphanumeric characters, 0-9, A-F, or twenty-six (using 128-bit) alphanumeric 
characters, 0-9, A-F in the WEP key field. 

9.  

Click OK if editing a profile or Finish if in the Profile Wizard to save the settings.

  

NOTE: You must use the same encryption type, index number, and WEP key as other devices on your 

wireless network.  

 

Copyright © 2002 Intel Corporation.