Справочник Пользователя для Broadcast Microwave Services Inc FC-FCII-7
8
Slip the FCII in between the brackets.
Secure the FCII to the brackets using the matching hole set used on the FCII-AC. The FCII should be
stacked directly on top of the FCII-AC, not staggered.
stacked directly on top of the FCII-AC, not staggered.
Tighten all screws.
The FCII-MAX power amplifier requires proper heat transfer. The FCII-MAX needs to be on the top of
the stack.
the stack.
Use 4 #10-32 screws to secure, but do not tighten, two brackets, one forward, one back to one side of the
FCII.
FCII.
Use 4 #10-32 screws to secure, but do not tighten, the two brackets on the opposite side of the FCII.
Align the FCII-MAX so that it is facing the same way as the FCII-AC and FCII.
Slip the FCII-MAX in between the brackets.
Secure the FCII-MAX to the brackets using the matching hole set used on the FCII. The FCII-MAX
should be stacked directly on top of the FCII, not staggered.
should be stacked directly on top of the FCII, not staggered.
Tighten all screws.
Figure 2 is an example of one way to install the brackets used to attach the FCII-AC, FCII and FCII-MAX
together.
together.