Internal Photos для Tecom Co Ltd MA-1660
Tecom Co., LTD
FCC ID: D6XMA1660
Report # EUT Internal Photo
FCC Part 15 Subpart C Test Report
Page 3 of 16
1 - GENERAL INFORMATION
1.1 Product Description for Equipment Under Test (EUT)
Tecom Co., Ltd. model MA1660 or the "EUT" as referred to in this report is a 2.4 GHz Multiple -
Handset Cordless Phone. The EUT was composed of two parts, one is a Handset which measured
7.0” L x 2.0” W x 1.25”H, and the other is a Base which measures 3.5”L x 3.0”W x 2.0”H.
Handset Cordless Phone. The EUT was composed of two parts, one is a Handset which measured
7.0” L x 2.0” W x 1.25”H, and the other is a Base which measures 3.5”L x 3.0”W x 2.0”H.
The system provides many features such as:
1. 2 CO line Capacity (MHS-5 only with 1CO line capacity)
2. 12*2 LCD with icons
3. Directory (80 Numbers and name)
4. Intercom calling
5. Conference
6. Call Transfer
7. Do Not Disturb (DND)
8. Headset Compatibility
9. Etc.
2. 12*2 LCD with icons
3. Directory (80 Numbers and name)
4. Intercom calling
5. Conference
6. Call Transfer
7. Do Not Disturb (DND)
8. Headset Compatibility
9. Etc.
1.2 Objective
This type approval report is prepared on behalf of TECOM CO., LTD. in accordance with Part 2, Subpart J,
Part 15, Subparts A, B and C of the Federal Communication Commissions rules.
Part 15, Subparts A, B and C of the Federal Communication Commissions rules.
The objective of the manufacturer is to demonstrate compliance with FCC rules for Output Power,
Antenna Requirement, Hopping Channel Separation, Number of Hopping Frequency Used, Channel
Bandwidth, Dwell Time on Each Channel, Band Edge, 100 kHz Bandwidth of Band Edges Measurement,
Spurious Emission, and Conducted and Radiated Emission.
Antenna Requirement, Hopping Channel Separation, Number of Hopping Frequency Used, Channel
Bandwidth, Dwell Time on Each Channel, Band Edge, 100 kHz Bandwidth of Band Edges Measurement,
Spurious Emission, and Conducted and Radiated Emission.
1.3
Related Submittal(s)/Grant(s)
No Related Submittals
1.4 Test Methodology
All measurements contained in this report were conducted with ANSI C63.4 –1992, American National
Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and
Electronic Equipment in the range of 9 kHz to 40 GHz. All radiated and conducted emissions
measurement was performed at Bay Area Compliance Laboratory, Corp. The radiated testing was
performed at an antenna-to-EUT distance of 3 meters.
Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and
Electronic Equipment in the range of 9 kHz to 40 GHz. All radiated and conducted emissions
measurement was performed at Bay Area Compliance Laboratory, Corp. The radiated testing was
performed at an antenna-to-EUT distance of 3 meters.