Справочник Пользователя для Lectrosonics Inc DB
DSW Digital Wireless System
LECTROSONICS, INC.
10
Menu Map and Icons
Receiver and transmitter setup or adjustments to
settings can be completed using the receiver LCD
interface. The menus are organized into three groups,
as shown here.
settings can be completed using the receiver LCD
interface. The menus are organized into three groups,
as shown here.
The TOP MENU includes system setup and connec-
tions, frequency scanning and selection, and encryp-
tion key generation and transfer to transmitters for
overall system setup. Links to the TX and RX menus
are located at the leftmost position.
tions, frequency scanning and selection, and encryp-
tion key generation and transfer to transmitters for
overall system setup. Links to the TX and RX menus
are located at the leftmost position.
TOP MENU
DETECT identifies the installed receiver
modules.
modules.
SMART TUNE launches a spectrum scan of
any one or more of the installed receiver
modules and identifies prospective operating
any one or more of the installed receiver
modules and identifies prospective operating
frequencies. A frequency is selected and a screen
prompt appears on the LCD allowing you to connect a
transmitter and load the frequency settings or skip to
the next scan.
prompt appears on the LCD allowing you to connect a
transmitter and load the frequency settings or skip to
the next scan.
SPECTRUM SCAN is useful for manually
examining the RF activity within the tuning
range of the installed modules. The scanned
examining the RF activity within the tuning
range of the installed modules. The scanned
results appear in a histogram that can be browsed with
coarse or fine detail.
coarse or fine detail.
KEY TRANSFER loads the encryption key
into the transmitter via the key cable.
into the transmitter via the key cable.
KEY MANAGEMENT is used to generate or
delete an encryption key, and to configure the
nature of the key as Persistent or One-time.
delete an encryption key, and to configure the
nature of the key as Persistent or One-time.
LOCK PANEL is used to lock out the front
panel controls, create a password or leave the
controls unlocked.
panel controls, create a password or leave the
controls unlocked.
BACK LIGHT adjusts the appearance of the
LCD.
LCD.
ANTENNA POWER inserts DC voltage on
the rear panel BNC jacks to power remote RF
amplifiers such as the one in the Lectrosonics
the rear panel BNC jacks to power remote RF
amplifiers such as the one in the Lectrosonics
ALP650 model LPDA “shark fin” antenna. The BNC
jacks can be configured independently.
jacks can be configured independently.
DETECT
SMART
TUNE
SPECTRUM
SCAN
KEY
TRANSFER
KEY
MANAGEMENT
SEND
SETTINGS
TX BATTERY
TX AUDIO
GAIN
LF ROLLOFF
TX PHASE
FREQ ADJUST
AUDIO LEVEL
MONITOR
AUDIO
SMART NR
PHASE
TOP MENU
TX MENU
RX MENU