Справочник Пользователя для Lectrosonics Inc DB

DSW Digital Wireless System

Rio Rancho, NM

Navigating Menus

The LCD/keypad interface makes it easy to browse
the menus and make the selections for the setup you
need. When the unit is powered up in either the operat-
ing or the standby mode, press MENU/SEL on the
keypad to enter a menu structure on the LCD. Use the

and arrow buttons to select the menu item. Then

press the MENU/SEL button to enter the menu.

-40

-20

Gain

The prompt in the upper right corner may

display one or both arrows, depending upon

what adjustment can be made. If the changes

are locked, a small padlock symbol will appear.

Gain

Freq.
ProgSw
Rolloff

Adjusting LCD Backlight

For viewing the LCD in dimly lit conditions, the back-
light can be turned on continuously or set to turn off
automatically after either 30 seconds or 5 minutes.

Backlit

About
Default
WipeKey

Backlit

On
30 sec
5 min

Locking/Unlocking Changes to Settings

Changes to the settings can be locked.

Locked?

Backlit
About
Default

Locked?

No
Yes

-40

-20

Gain

A small padlock symbol will appear on adjustment

screens when changes have been locked.

When changes are locked, several controls and ac-
tions can still be used:

menu or removing the batteries.

Selecting Programmable Switch Functions

The programmable switch on the top panel can be
conﬁgured using the menu to provide several func-
tions:

ProgSw

Rolloff
Phase
BatType

ProgSw

(none)
Mute
Power

Use the

and

arrow buttons to

select the desired

function or disable

the switch

NOTE: The programmable switch will continue to
operate whether or not keypad changes are locked.

Other Menu Items

Refer to the table and descriptions on the following
page for an explanation of the menu items.