Справочник Пользователя для Intermatic H0007
Z-wave Compatible Module:
1. Install a Z-wave compatible module as described by its instruction manual.
2. Do not exceed the maximum ratings of the module.
2. Do not exceed the maximum ratings of the module.
Operating Instructions
Creating a Network
Creating a Network
1. On the remote controller, the include button is located behind a protective lid.
Raise the lid to gain access to the Include and Exclude buttons.
2. Press and release the include button. The INCLude icon in the LCD display will
begin to flash indicating that the controller is ready to register modules.
3. On the Plug-in Dimmer, press and release the black button. If successful, the
“INCL” icon on the controller will stop flashing and the word “SUCCESSFUL”
will turn on steady in the LCD display for 2 seconds. If not successful, the words
“NOT SUCCESSFUL” will turn on steady in the LCD display for 2 seconds.
will turn on steady in the LCD display for 2 seconds. If not successful, the words
“NOT SUCCESSFUL” will turn on steady in the LCD display for 2 seconds.
4. Repeat steps 2 & 3 for each module you wish to add to the network.
Assigning Modules to Channels
1. On the remote controller, press and hold the ON and OFF buttons for the channel
to which you want to assign a module at the same time. After about 3 seconds, the
word, “LEARN” will be displayed in the LCD display. This indicates that the
controller is ready to assign a module to that channel. You may now release the
ON and OFF buttons.
word, “LEARN” will be displayed in the LCD display. This indicates that the
controller is ready to assign a module to that channel. You may now release the
ON and OFF buttons.
2. Press and hold the Include button. The INCLude icon will turn on.
3. While still holding the Include button in step 3, press and release the black button
3. While still holding the Include button in step 3, press and release the black button
on the module. Do not release the Include button on the controller yet.
4. Choose a light level by pressing and holding, or pressing and releasing the black
button on the module. Possible settings are FULL ON or FULL OFF, (or DIM
LEVEL for dimmable modules).
LEVEL for dimmable modules).
5. After reaching your desired light level, release the Include button on the remote
controller. The remote controller will automatically store the light level that you
have just set. The word “SUCCESSFUL” will turn on for 2 seconds and the
module is now associated to that channel with a default light level assigned.
have just set. The word “SUCCESSFUL” will turn on for 2 seconds and the
module is now associated to that channel with a default light level assigned.
Remotely turning ON and OFF and Dimming a module
1. To turn ON a module, press and release the ON button for that module’s given
channel.
2. To turn OFF a module, press and release the OFF button on for that module’s
given channel.
3. To dim a module up, press and hold the ON button. To dim a module down, press
and hold the OFF button.
Model HA07 – Mater Remote Controller – Specifications
Range:
Range:
>50 feet
Uses 4 size “AA” alkaline batteries. 1.5VDC ea.
Uses 4 size “AA” alkaline batteries. 1.5VDC ea.
Suitable for use in dry locations.
Made in China.
Made in China.