Справочник Пользователя для Sennheiser Electronic Corp BTT100

Bluetooth

® Audio Transmitter | 13 

Getting started

Pairing the transmitter to the headphones

CAUTION
Danger of malfunction!

The transmitted radio waves of Bluetooth devices can impair 

the operation of sensitive and unprotected devices.

 

X

Only use Bluetooth devices in locations where wireless 

transmission is permitted.

The transmitter can save the connection profiles of up to eight Bluetooth 

headphones. If you pair the transmitter to the ninth headphones, the saved 

connection profile of the least used headphones will be overwritten.
If you are watching/listening from your home entertainment system, the 

transmitter can connect to up to 2 headphones simultaneously.

Pairing the transmitter to the headphones
1.  Set your headphones to pairing mode.

If you are using Sennheiser headphones, the headphones’ LED usually 

flashes blue and red during pairing. 

2. Press the the Multifunction button on the transmitter for 4 seconds.

The transmitter goes into pairing mode and the LED flashes blue and 

red. If pairing is successful, the LED flashes and then lights up blue for 

approximately 3 minutes.

2

1

OFF

4s

Hold

Pairing

Connected

... 3min

If no connection is established within 5 minutes, pairing mode is 

terminated and the transmitter goes into standby mode. If necessary, 

repeat the pairing procedure.