Справочник Пользователя для Sennheiser Electronic Corp G3SKMEM
10
Using the radio microphone
Changing the color-coded protection ring
The color-coded protection ring
쐊
prevents the multi-function switch
쐈
from accidental operation. Protection rings
쐊
in different colors are avail-
able as accessories (information on accessories can be found on our web
site at www.sennheiser.com). The protection rings allow you to clearly
identify each radio microphone.
site at www.sennheiser.com). The protection rings allow you to clearly
identify each radio microphone.
Remove the color-coded protection ring
쐊
as shown.
Put on a new protection ring
쐊
as shown.
Using the radio microphone
To establish a transmission link, proceed as follows:
1.
Switch the receiver on
(see the instruction manual of the receiver).
(see the instruction manual of the receiver).
2.
Switch the radio microphone on (see below).
The transmission link is established and the display backlighting of
the receiver changes from red to orange.
The transmission link is established and the display backlighting of
the receiver changes from red to orange.
Switching the radio microphone on/off
To switch the radio microphone
on
(online operation):
To switch the radio microphone
off
:
If necessary, deactivate the lock mode (see page 11).
Briefly press the
ON
/
OFF
button
쐉
.
The radio microphone transmits an RF signal. The transmis-
sion icon
sion icon
햵
is displayed.
The red
ON
LED
쐎
lights up and the standard display
“
Frequency/Name
” appears on the display panel.
You can switch the radio microphone on and
deactivate the
RF signal on switch-on
. For more information, see below.
Press the
ON
/
OFF
button
쐉
until “
OFF
” appears on the
display panel. The red
ON
LED
쐎
goes off and the display
panel turns off.
쐊
쐊
쐊
쐊
쐉
쐎
ON/OFF
ON/OFF
ew G3 SKM 500_529673_0109_SP8_PRT.book Seite 10 Dienstag, 10. Februar 2009 11:20 11