Справочник Пользователя для Sennheiser Electronic Corp TG2020D
25
Using the components
Switching the devices on/off
Switching the transmitter on/off
To switch the transmitter on:
Briefly press the
ON
/
OFF
button
.
The LC display
indicates the device name and
then switches to the standard display.
To switch the transmitter off:
Press and hold the
ON
/
OFF
button
until “
OFF
“
appears on the display.
Note:
Remove the batteries or the accupack when the
transmitter will not be used for extended periods of
time.
transmitter will not be used for extended periods of
time.
Muting the transmitter
To temporarily mute the transmitter’s microphone
input:
input:
Set the
MUTE
switch
to the position “
MUTE
“.
The red LED
LOW BATT
/
MUTE
lights up
permanently. The
MIC
level display
no longer
shows any deflection. The transmitter’s micro-
phone input is muted.
phone input is muted.
Note:
The muting function (MUTE) mutes the microphone
input
input
but not the line input
. This function
enables a pre-recorded track to be played through the
line input without being disturbed by the tour guide’s
microphone. When the track has finished, the guide
can un-mute the microphone and continue talking.
line input without being disturbed by the tour guide’s
microphone. When the track has finished, the guide
can un-mute the microphone and continue talking.
To deactivate the muting function:
Set the
MUTE
switch
back to the right.
The red LED
LOW BATT
/
MUTE
goes off. The
MIC
level display
and the
LINE
level display
indicate the current levels.
LINE
CH 03
MIC