Справочник Пользователя для OMG plc IMUAP1

Скачать
Страница из 9
  
Safety and Regulatory Information 
 
Page : 7 
 
Specific Absorption Rate (SAR) Certification 
For United States of American Customers (FCC) 
For Standalone SAR exclusion consideration, when SAR Exclusion Threshold requirement 
in KDB 447498 is satisfied, standalone SAR evaluation for general population exposure 
conditions  by  measurement  or  numerical  simulation  is  not  required.  At  2480  MHz, 
equivalent isotropically radiated power of the device is 0.360mW, which will be less than 
the SAR Exclusion Threshold (9.53mW). For further information, please see clause 4.3 of 
KDB 447498 D01 General RF Exposure Guidance.” 
This  device  has  been  granted  authorisation  to  be  used  in  the  United  States  for  all 
equipment exhibiting DMR-IMUAP1.  
For Canadian Customers (ISED) 
SAR evaluation is required if the separation distance between the user and/or bystander 
and the antenna and/or radiating element of the device is less than or equal to 20 cm, 
except when the device operates at or below the applicable output power level (adjusted 
for  tune-up  tolerance)  for  the  specified  separation  distance.  At  2480  MHz,  equivalent 
isotropically radiated power of the device is 0.360mW, which will be less than the SAR 
Exclusion Threshold at distance of ≤ 5 mm (3.94mW). For further information, please see 
clause 2.5.1 of RSS-102 Issue 5 March 2015. 
This  device  has  been  granted  authorisation  to  be  used  in  Canada  for  all  equipment 
exhibiting 11323A-IMUAP1. 
For European Union Customers (RED)
 
Minimum Safe distance for RF exposure, based on the Reference Levels for General Public 
exposure of EU Council Recommendation (1999/519/EC) of 12 July 1999 on the limitation 
of  exposure  of  the  general  public  to  electromagnetic  fields  (0  Hz  to  300  GHz)  was 
calculated:
 
 
 
Frequency (MHz)  
EIRP (dBm)  
Limit (W/m2)  
Minimum safe 
distance (m) 
 
2480  
-8.2  
10  
0.001096