Справочник Пользователя для OMG plc VICP1

Origin 
Setup & 
Maintenance 
Guide 

Vicon Motion Systems Ltd.

04-Sep-2018

Page 14 of 45

Turn on clusters and pair with a Beacon

1. On the cluster, press the power button to turn it on. (Note that it is 

easiest to match physical labels with entries in the System tab if you 

turn on clusters one at a time.)

The cluster automatically searches for a radio channel with a Beacon 

pairing broadcast. It records the radio channel for communication with 

this Beacon. This record persists when the cluster is turned off.

In Evoke, on the System tab, in the Active Cluster section, a Cluster 

entry is displayed.

2. Ensure that the cluster connection status is blue (connected but not 

programmed with a marker pattern).

<img>

 

Note that the cluster battery level is indicated by status icon.

<img>

 

If any other icon is displayed, see 

 to 

troubleshoot possible issues.

3. Assign a tracking object (LED pattern) to the cluster. To do this, on the 

System tab, select a cluster and from the Pattern drop-down menu, 

choose the corresponding object pattern.

Note that a cluster can be assigned a pattern from any object, but to 

avoid confusion it is best to label clusters according to their intended 

location (e.g. Green_Hand_L or Red_Backpack_Top) and name objects 

accordingly.

When you have assigned a pattern to the cluster:

• The pattern error icon clears from cluster entry.

• The cluster connection status turns green (active with LEDs turned 

on).

4. To confirm that the object is tracked and labeled correctly, check that 

in the 3D Scene view, the object model is drawn and its label matches 

the associated cluster(s).

5. When you have paired all the clusters, turn off pairing mode. To do this, 

on the System tab select Beacon and set Pairing Mode to Off.

Cluster settings are stored in the System file (by default located at 

C:

\Users\Public\Documents\Vicon\Evoke1.0\LastRun\

<username>

\LastRu

n.System

). Object settings are stored in the Subjects file (by default 

located at 

C:

\Users\Public\Documents\Vicon\Evoke1.0\LastRun\

<username>

\LastRu

n.Subjects

). Settings are auto-saved on exit.