Справочник Пользователя для OMG plc VICP1

Origin 
Setup & 
Maintenance 
Guide 

Vicon Motion Systems Ltd.

04-Sep-2018

Page 40 of 45

Specific Absorption Rate (SAR) certification

For United States of American Customers (FCC)

For Standalone SAR exclusion consideration, when SAR Exclusion 

Threshold requirement in KDB 447498 is satisfied, standalone SAR 

evaluation for general population exposure conditions by measurement or 

numerical simulation is not required. At 2480 MHz, equivalent isotropically 

radiated power of the devices is 3.9 mW, which will be less than the SAR 

Exclusion Threshold (95.54 mW). For further information, please see clause 

4.3 of KDB 447498 D01 General RF Exposure Guidance.

This device has been granted authorization to be used in the United States 

for all equipment exhibiting DMR IMUAP1.

For Canadian Customers (ISED)

SAR evaluation is required if the separation distance between the user and/

or bystander and the antenna and/or radiating element of the device is less 

than or equal to 20 cm, except when the device operates at or below the 

applicable output power level (adjusted for tune-up tolerance) for the 

specified separation distance. At 2440 MHz, equivalent isotropically 

radiated power of the device is 4.1 mW, which will be less than the SAR 

Exclusion Threshold at distances of between ≥5 and ≤ 10 mm of 4-7 mW 

respectively at 2450 MHz. The minimum distance between the cluster 

aerial and the underside is 6.69 mm. The Beacon emissions are assessed as 

presenting a negligible risk. For further information, please see clause 2.5.1 

of RSS-102 Issue 5 March 2015.

This device has been granted authorisation to be used in Canada for all 

equipment exhibiting 11323A-IMUAP1.

For European Union Customers (RED)

Minimum safe distance for RF exposure, based on the 

Reference Levels for 

General Public exposure of EU Council Recommendation (1999/519/EC)

 of 

12 July 1999 on the limitation of exposure of the general public to 

electromagnetic fields (0 Hz to 300 GHz) was calculated:

Frequency 
(MHz)

EIRP 
(dBm)

Limit (W/
m2)

Minimum safe distance (m)

2480

6.8

10

0.0062