Справочник Пользователя для Somfy Systems BRZ

GRABER

GRABER

GRABER

14

All shade end limits, controls, and intermediate positions should be programmed prior to joining the network.

1.  Place hub into discovery mode (add device). There will be 

some form of feedback from the hub that it is searching 
for a device.

2.  Place single-channel remote in programming mode by 

pressing and holding the programming button until the 
LED light bar begins to flash green then release    
the button.

3.  The hub will find the device.

4.  Follow instructions for the system. 

1.  Place hub into remove device mode (exclude).

2.  Press and hold the programming button until the LED light 

bar begins to blink green then release the button.

3.  LED light bar will turn solid green and turn off.

4.  Follow instructions on the hub.