Справочник Пользователя для Somfy Systems BRZ

GRABER

GRABER

GRABER

GRABER

GRABER

3

Upon first power up, you will see a green light illuminate on the headrail or motor end of the shade. This will happen 
whenever power is first applied or restored after an outage. Press the UP or DOWN button to operate the shade.

Note: you can press and release the opposite directional button to stop the shade while it is in motion.

Operating your shade with the two-button remote or optional single-channel remote.

        button: Acts as a STOP button while shade is in 
motion. It can also be programmed as a quick way to 
bring shades to your preferred intermediate position.

1.  Press and releasing        while your shade is at rest 

will bring your shade to your        position.

2.  Press and releasing        while the shade is in motion 

will stop the shade.

Press and 
release the 
UP button 
to fully open 
the motorized 
shade.

Press and 
release the 
DOWN button 
to fully close 
the motorized 
shade.

Your controls have been pre-programmed to control your shade. The upper and lower limits and        
position have already been set. If you are not satisfied with the default upper, lower, or        position 
of your shade, see steps in the following sections of this manual.