Справочник Пользователя для Sony Corporation DWM01

28

Using the Encrypted Transmission Function

between the microphone and the receiver 
has not occurred within a given amount 
of time. Pairing may be harder to do 
when another receiver is engaged in 
pairing nearby. 

• When it becomes hard to use the remote 

control, the remote control may be 
improved by switching the wireless 
remote control function off, then on again 
in the RF REMOTE display, then re-
pairing with the microphone (change to a 
channel with less interference).

To prevent hacking of the signal, the 
microphone scrambles the signal during 
transmission. To use this function, select 
one of the following encrypted transmission 
modes:

Secure key mode: An encryption key 
that is automatically generated by the 
microphone is used by both the microphone 
and receiver in this one-to-one encrypted 
transmission method.

Password mode: You choose a 
password of up to eight characters that can 
be set for multiple microphones/
transmitters and receivers. This enables 
encrypted transmission within a group. 

Make sure the same mode is set on the 
microphone/transmitter and receiver.

Use this mode for one-to-one encrypted 
transmission between one microphone and 
one receiver.
An encryption key that cannot be read from 
the outside is automatically generated by 
the microphone. This key is transmitted to 
the receiver through a USB connection or 
the RF REMOTE function, enabling 
encrypted transmission to take place.