Справочник Пользователя для Sony Corporation HCDBX5BT

CMT-BX5BT.GB.3-095-507-11(1)

O

thers

  Make sure the power cord and 

speaker cords are correctly and fi rmly 
connected.

  Find your problem in the checklist 

below, and take the indicated 
corrective action. 
If the issue persists, contact your 
nearest Sony dealer.

 If the STANDBY indicator fl ashes
Immediately unplug the power cord, 
and check the following items.
 If your system has a voltage 

selector, is the voltage selector set to 
the correct voltage?

 Are you using only the supplied 

speakers?

 Is anything blocking the ventilation 

holes on the top or back of the 
system?

Aft er the STANDBY indicator 



 

stops fl ashing, reconnect the power 
cord, and turn on the system. If the 
issue persists, contact your nearest 
Sony dealer.

Sound comes from one channel, 
or the left and right volumes are 
unbalanced.
 Place the speakers as symmetrically as 

possible.

 Connect only the supplied speakers.

Severe hum or noise.
 Move the system away from sources of 

noise.

 Connect the system to a diff erent wall 

socket.

 Install a noise fi lter (available 

separately) to the power cord.

 There is no sound.
 If the BLUETOOTH indicator 



 is lit 

or fl ashing when a function other than 
the Bluetooth function is selected, no 
sound is heard through the speakers 
or PHONES jack 



. Press and hold 

BLUETOOTH OPR 



 for about 

2 seconds until the BLUETOOTH 
indicator 



 turns off . 

The remote does not function.
 

 Remove any obstacles between the 

remote and the remote sensor 



 on 

the unit, and position the unit away 
from fl uorescent lights.

 Point the remote at the system’s sensor.
 Move the remote closer to the system. 

The sound skips, or the disc will not 
play.
 Wipe the disc clean, and replace it.
 Move the system to a location away 

from vibration (for example, on top of 
a stable stand).

 Move the speakers away from the 

system, or place them on separate 
stands. At high volume, speaker 
vibration may cause the sound to skip.

Play does not start from the fi rst 
track.
 Press PLAY MODE 



 repeatedly until 

both “PGM” and “SHUF” disappear to 
return to normal play.

