Справочник Пользователя для Sony Corporation HCDDH7BT
CMT-DH7BT.GB.3-097-195-11(1)
66
GB
CMT-
Additional Information
Troubleshooting
Should you encounter a problem with
your system, do the following:
your system, do the following:
1
Make sure the power cord and
speaker cords are connected
correctly and fi rmly.
speaker cords are connected
correctly and fi rmly.
2
Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
troubleshooting checklist below and
take the indicated corrective action.
If the problem persists aft er doing all
of the above, consult your nearest Sony
dealer.
of the above, consult your nearest Sony
dealer.
If the STANDBY indicator fl ashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
and check the following items.
If your system has a voltage
selector, is the voltage selector set
to the correct voltage?
to the correct voltage?
Are you using only the supplied
speakers?
Is anything blocking the ventilation
holes on the rear of the system?
Aft er the STANDBY indicator
stops fl ashing, reconnect the power
cord, and turn on the system, If the
issue persists, contact your nearest
Sony dealer.
cord, and turn on the system, If the
issue persists, contact your nearest
Sony dealer.
General
The display starts fl ashing as soon
as you plug in the power cord even
though you have not turned on the
system.
Press
as you plug in the power cord even
though you have not turned on the
system.
Press
(see step 8 of “Hooking
up the system” on page 11).
The clock or timer setting is canceled.
Th e power cord is disconnected or a
Th e power cord is disconnected or a
power failure occurred. Redo “Setting
the clock” (page 14). If you have set
the timer, redo “Waking up to music”
(page 69).
the clock” (page 14). If you have set
the timer, redo “Waking up to music”
(page 69).
“– –:– –” appears in the display.
A power failure has occurred. Set the
A power failure has occurred. Set the
clock (page 14) and timer settings
(page 69) again.
(page 69) again.
There is no sound.
Press VOLUME +
Press VOLUME +
repeatedly.
Th e headphones are connected to the
PHONES jack.
Check the speaker connections
(page 9).
Th e system is in pause mode, in Slow-
motion Play or in Lock Search. Press
to start the playback.
If the BLUETOOTH indicator
is lit
or fl ashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack
. Press and hold
BLUETOOTH OPR
for about
2 seconds until the BLUETOOTH
indicator
indicator
turns off .
There
A T
A T
unit
or V
or V
Mov
nois
Con
outl
Inst
avai
The ti
Che
Che
corr
Can
(pag
The re
Rem
Rem
rem
Mov
Poin
Rep
Loca
Poin
Rep
Loca
fl uo
There
Red
Red
The co
persis
Turn
persis
Turn
on a
irreg
spea
irreg
spea
THEAT
work.
If di
work.
If di
unit
wor
wor