Справочник Пользователя для Sony Corporation MHCV11
40
GB
MHC-
MHC-V11.4-582-493-11(1)
Disc
System
C
s
s
Laser
E
L
L
*
USB
(USB
T
Supp
discs
discs
Suppo
M
W
W
Samp
M
3
W
3
W
*
Tune
FM ste
F
Anten
F
FM tu
T
N
m
(1
O
(
N
m
(1
O
(
• BLUETOOTH devices connected with this
system must comply with the BLUETOOTH
specification prescribed by the Bluetooth
SIG, Inc., and must be certified to comply.
However, even when a device complies
with the BLUETOOTH specification, there
may be cases where the characteristics or
specifications of the BLUETOOTH device
make it impossible to connect, or may
result in different control methods, display
or operation.
specification prescribed by the Bluetooth
SIG, Inc., and must be certified to comply.
However, even when a device complies
with the BLUETOOTH specification, there
may be cases where the characteristics or
specifications of the BLUETOOTH device
make it impossible to connect, or may
result in different control methods, display
or operation.
• Noise may occur or the audio may
cut off depending on the BLUETOOTH
device connected with this system,
the communications environment, or
surrounding conditions.
device connected with this system,
the communications environment, or
surrounding conditions.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(The United States model only)
DISTORTION:
(The United States model only)
Left/Right Channel:
With 3 ohms loads, both channels
driven, from 120
With 3 ohms loads, both channels
driven, from 120
10,000 Hz; rated
30 watts per channel minimum
RMS power, with no more than
0.7% total harmonic distortion from
250 milliwatts to rated output.
RMS power, with no more than
0.7% total harmonic distortion from
250 milliwatts to rated output.
Amplifier section
The following are measured at
AC 120 V – 240 V, 50/60 Hz
Power Output (rated):
Left/Right Channel: 400 W + 400 W
(at 4 ohms, 1 kHz, 1% THD)
(at 4 ohms, 1 kHz, 1% THD)
RMS output power (reference):
Left/Right Channel: 600 W + 600 W
(per channel at 4 ohms, 1 kHz)
(per channel at 4 ohms, 1 kHz)
Speaker section
Speaker system:
Tweeter + Woofer
Tweeter L/R:
50 mm (xx in), cone type
Woofer:
200 mm (xx in), cone type
Inputs
AUDIO/PARTY CHAIN IN L/R:
Voltage 2 V, impedance 47 kilohms
MIC 1, MIC 2:
Sensitivity 1 mV, impedance
10 kilohms
10 kilohms
Outputs
AUDIO/PARTY CHAIN OUT L/R:
Voltage 2 V, impedance 1 kilohms