Справочник Пользователя для Sony Corporation NACSV10I

Скачать
Страница из 92
C:\_Work\Netjuke\Leia\IM\4192585111NACSV10i\01GB-NACSV10i\050GET.fm
masterpage: Left_L1
NAC-SV10i
4-192-585-11(1)
20
GB
Performing initial setup operations
When the unit is turned on for the first time after 
you purchase it, initial setup operations are 
required. The initial setup includes the initial 
setting procedure for the unit (this will be 
performed automatically), network settings, the 
clock settings, and obtaining a service list (for the 
Music Services function).
When you are indicated to set the network or the 
clock, refer to the respective pages.
Entering characters will be required during the 
setup operations. For details on entering 
characters, see “Entering text” (page 18).
WARNING
Do not disconnect the AC power adaptor while the 
unit is making the initial setup operations. Doing 
so may cause the unit to malfunction.
1
Press 
?/1 (power) to turn on the 
unit.
2
When “Set the items required to 
use this unit. Press ENTER to 
continue.” appears, press ENTER.
3
When the “Start setup?” display 
appears, select “OK.”
The unit starts making the initial settings.
4
When the “Network Settings” 
display appears, select “Yes.”
The “Connection” display appears.
Before you start setting up a network, check 
the chart on page 24 to decide which 
connection method you will use to connect 
the unit to your home network. Then, refer to 
the respective page (as follows) to perform 
the setup operation for the connection method 
chosen.
When you use a wireless 
connection
Access point scan method:
Go to step 3 of “Searching for an access 
point and setting up a wireless network 
(access point scan)” (page 26).
Manual connection method:
Go to step 3 of “If you cannot find the 
desired network name (SSID) (manual 
setup method)” (page 27).
WPS push button configuration method:
Go to step 3 of “Setting up a wireless 
network using the WPS push button 
configuration method” (page 27).
WPS PIN code method:
Go to step 3 of “Setting up a wireless 
network using the WPS PIN code method” 
(page 28).
When you use a wired connection
Go to step 4 of “Setting up a wired network” 
(page 29).
Make sure that the network (LAN) cable has 
been connected to the NETWORK port on 
the rear of the unit. See step 1 of “Setting up a 
wired network” (page 29), as well.
When the network settings have been 
completed, the unit changes to the clock 
settings display.
?/1
M/m/</,/
ENTER
010COV.book  Page 20  Tuesday, June 15, 2010  11:35 AM