Справочник Пользователя для Sony Corporation PCG9D1R
Troubleshooting Your Computer
115
4
Press the Right Arrow
key to select the Exit tab, and then press the Down
Arrow
key to select Get Default Values. The message “Load default
values for all SETUP items” appears.
5
Press Enter. The Setup Confirmation window appears.
6
Make sure Yes is selected, and press Enter.
7
Make sure Exit (Save Changes) is selected, and press Enter. The Setup
Confirmation window appears.
Confirmation window appears.
8
Make sure Yes is selected, and press Enter. The computer restarts.
My computer starts, but the message “Operating system not
found” appears, and Windows does not start.
found” appears, and Windows does not start.
❑
If you have connected a docking station with a floppy disk drive or an
external floppy disk drive, make sure there is no disk in the floppy disk drive
(non-bootable).
external floppy disk drive, make sure there is no disk in the floppy disk drive
(non-bootable).
❑
If a non-bootable floppy disk is in the drive, follow these steps:
1
Turn off the computer, and remove the floppy disk.
2
Restart the computer and confirm that the Windows® operating system
starts properly.
starts properly.
❑
If Windows still does not start, follow these steps to start the BIOS:
1
Remove any floppy disk from the floppy disk drive.
2
Turn off the computer.
3
Remove any peripheral devices connected to the computer.
4
Restart the computer.
5
Press F2 when the Sony logo appears. The BIOS setup menu window
appears.
appears.
6
Press the Right Arrow
key to select the Exit menu.
7
Press the Down Arrow
key to select Get Default Values, and then
press Enter. The message “Load default values for all SETUP items”
appears.
appears.
✍
If this occurs on a regular basis, contact Sony Computing Support
(http://www.sony.com/pcsupport).
(http://www.sony.com/pcsupport).
Kingfisher Draft 2