Справочник Пользователя для Sony Corporation RM215

17

Using the Encrypted Transmission Function

When you connect the USB cable, the 
encryption key is exchanged 
automatically, and encrypted 
transmission in secure key mode 
begins. Remove the USB cable.

The receiver searches for a transmitter 
that it has been paired with. After the 
receiver detects the transmitter, the 
transmitter exchanges the encryption 
key with the receiver and encrypted 
transmission begins.

Set this mode when multiple transmitters 
are paired with multiple receivers for 
encrypted transmission.
If the transmitters and receivers are set with 
the same user-designated password, the 
audio signal can be decoded. This mode is 
useful when multiple transmitters and 
receivers are used as a single group, or 
when the audio signal from one transmitter 
is received by multiple receivers at the same 
time.

With the ENCRYPTION indication on 
(in the RX1/2 menu), hold down the 
SET button until the item to be set 
flashes.

Press the + or 

–

 button repeatedly to 

select PASSWORD, and then press the 
SET button.

Enter a password of up to 8 characters 
on the receiver.

+: The first press on the + button 
displays the character set. You can 
then use the + and – buttons to select 
the desired character. And then, 
pressing the SET button adds the 
selected character to the end of the 
current name.
– : Deletes the last character in the 
current name.
SET: Enters the character or edited 
name.

Set the encrypted transmission 
function on the transmitter to 
PASSWORD.

On the transmitter, set the same 
password that was set on the receiver.

 

It is recommended that you change the 
password periodically.

USB cable (supplied)

USB 
adapter 
cable 
(supplied)