Справочник Пользователя для Sony Corporation UTXM03

Attaching Accessories

16

You can charge nickel metal hydride batteries inserted in 
the transmitter (UTX-B03/M03/P03) and tuner 
(URX-P03).
When charging nickel metal hydride batteries, turn the 
power off and connect a commercially available USB-
output type AC adapter or portable power supply to the 
USB connector. 
The POWER indicator is lit orange while charging 
batteries. When charging is finished, the POWER 
indicator goes off.
When charging batteries using a USB-output type AC 
adapter or portable power supply, use a unit that satisfies 
the following conditions.
• Output connector: USB micro B type
• Rated voltage: 5 V
• Output current: 1 A or higher

• Charging may not be supported, depending on the 

connected AC adapter, portable power supply, or 
computer port.

• Nickel metal hydride batteries are not charged while the 

transmitter or tuner is turned on.

This section describes how to attach the supplied 
accessories to each device.

Be sure to attach or remove the microphone after turning 
off the transmitter.

For a secure connection, turn to lock the connector.

Microphone (supplied)

Push the end of the microphone 
holder to expand the ring opening 
(1), and insert the microphone (2). 
Align the groove on the base of the 
microphone with the ring, then 
release the clip to secure the 
microphone.

Insert the microphone cable through the 
clamp of the holder clip.