Справочник Пользователя для Sony Corporation WRT8P1

11

Settings

enters transmit mode with the selected RF 
output power level.

You can adjust the audio input level, 
regardless of the INPUT selector position.

Set the INPUT selector according to 
the equipment connected to the audio 
input connector.

When a microphone is connected to 
the audio input connector, set the 
selector to MIC position; when a 
mixer, etc. is connected, set it to LINE 
position.

Turn the LEVEL control so that the 
AF/PEAK indicator lights up green 
continuously.

Reference input level can be adjusted 
within a range shown below.

Reference input level can be adjusted 
within a range shown below.

Occasional lighting of the AF/PEAK 
indicator in red is acceptable.

You can set the +48 V power supply for the 
electric condenser microphone in setting 
mode.

Set the transmitter to the setting mode.

Press the SET button repeatedly until 
the “MIC” or “MIC+48” indication 
appears.

Press the + button to select “MIC+48,” 
or press the – button to select “MIC.”

Select “MIC+48” to supply the +48 V 
power to the connected microphone 
when the INPUT selector is set to MIC 
position in transmit mode; select 
“MIC” to cancel the +48 V power 
supply.

Set the POWER switch to OFF to 
complete the setting, or press the SET 
button to set other items.

The results are stored in memory. The 
change becomes effective the next time you 
turn on the transmitter by setting the 
POWER switch to ON, and the transmitter 
enters transmit mode with the selected 
power supply setting.

or