Справочник Пользователя для Kenwood USA Corporation 383200

 A Selcall is a voice call to a particular station or group of 

stations.  Each transceiver is set up with an individual ID 

number for use with selcalls.

■

  Press the CAL key.

  Press the   or   key to select an ID number.

•  “Id” represents a single station, “GP” represents a group of 

stations, and “AL” represents all stations.

  Press the PTT switch to transmit the selected selcall ID.

•  The transceiver waits for the Data Transmit Modulation 

Delay time {page 29} before transmitting the selcall ID.

•  The side tone sounds if PTT ID side tone {page 30} is 

enabled.

  Release the PTT switch, then continue the call as 

normal when you receive a response.

  Press the CAL key to end the call.

  If Optional Signalling (menu “oP”) has been set to “FS” 

(FleetSync), you can also set up an Individual Selcall Alert 

type (menu “IA”) and Group Selcall Alert type (menu “GA”).  

Individual and Group Selcall Alert types range from “-oF” (off) 

and “- 1” (type 1) to “-10” (type 10).  Refer to the menu list on 

page 45.