Справочник Пользователя для Kenwood USA Corporation 409000

10

Select the desired zone using 

/

 (default).  Each zone 

contains a group of channels.

Select the desired channel/group ID using the Selector knob 
(default).  Each channel/group ID is programmed with settings 
for transmitting and receiving.

•

You can toggle the display between the zone and channel/group 
ID names and number by pressing the key programmed as Display 
Format, or by accessing the Menu {page 12}.

Note:  If the default settings for

/

 and the Selector knob 

have been changed, use the appropriate keys to select the zone 
and channel/group ID.

Select the desired zone and channel/group ID.

Press the key programmed as Monitor or Squelch Off to 
check whether or not the channel is free.

•

If the channel is busy, wait until it becomes free.

Press the PTT switch and speak into the microphone.
Release the PTT switch to receive.

•

For best sound quality, hold the transceiver approximately 
1.5 inches (3 ~ 4 cm) from your mouth.

Q 0DNLQJ*URXS&DOOV'LJLWDO

If a key has been programmed with Group or Group +
Status, you can select a group ID from the list to make a 
call to those parties on a Conventional channel.    
To select a group ID:

Press the key programmed as Group or Group + Status.

Press

/

 to select a group ID/name from the list.

Press and hold the PTT switch to make the call.

•

Speak into the transceiver as you would during a normal 
transmission.