Справочник Пользователя для Kenwood USA Corporation 409000
17
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by Kenwood Corporation.
protocol owned by Kenwood Corporation.
Note: This function is available only in analog operation.
6
(/&$//
6
(/(&7,9(
&
$//,1*
A Selcall is a voice call to a station or group of stations.
Q 7UDQVPLWWLQJ
1
Select your desired zone and channel.
2
Press the key programmed as Selcall or Selcall +
Status to enter Selcall mode.
Status to enter Selcall mode.
3
Press
/
to select the station you want to call.
•
If Manual Dialing is enabled, you can directly enter the
station ID using the DTMF keypad.
station ID using the DTMF keypad.
4
Press the PTT switch and begin your conversation.
Q 5HFHLYLQJ
An alert tone will sound and the transceiver will enter
Selcall mode. The calling station’s ID will appear when a
Selcall is received. You can respond to the call by pressing
the PTT switch and speaking into the microphone.
Selcall mode. The calling station’s ID will appear when a
Selcall is received. You can respond to the call by pressing
the PTT switch and speaking into the microphone.
Q ,GHQWLILFDWLRQ&RGHV
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
4-digit ID number. Each transceiver has its own ID.
•
Enter a Fleet number (100 ~ 349) to make a group call.
•
Enter an ID number (1000 ~ 4999) to make an individual call in
\RXUÁHHW
\RXUÁHHW
•
Enter a Fleet number to make a call to all units in the selected
ÁHHW)OHHWFDOO
ÁHHW)OHHWFDOO
•
Enter an ID number to make a call to the selected ID in all
ÁHHWV6XSHUYLVRUFDOO
ÁHHWV6XSHUYLVRUFDOO
)OHHW6\QF
$/3+$180(5,&:$<3$*,1*)81&7,21