Справочник Пользователя для Uniden America Corporation UB348

43

If you try to save a frequency that is already stored, 
the scanner sounds an error tone and displays the 
channel that was duplicated. If you entered the fre-
quency by mistake, press  . To enter the frequency 
anyway, press E to accept.

The scanner sets itself to program mode after you 
store a frequency.

You can use this mode to define the search range 
used during a chain search in each search bank. To 
set the scanner to program band select mode, press 
Func and PSrc. SRCH appears. Then select a 
search bank. 

When you select the search bank, the lower limit 
and upper limit frequency assigned in the search 
bank alternate on the display.

To select another search bank, press Func + PSrc 
or Func + 

  to increase the search bank number 

or Func + 

 to decrease it. Hold down Func + 

 or 

Func + 

 for about 1 second to quickly move 

through the search bank numbers. 

After choosing the search bank, follow these steps 
to set the lower limit and upper limit frequency.

1. Enter the lower limit frequency by using the 0-9 

and . keys.

2. Press E to select the lower limit frequency.

3. Enter the upper limit frequency by using the 0-9 

and  

keys.

4. Press E to select the upper limit frequency.