Справочник Пользователя для Uniden America Corporation UB348
46
Special Features
Notes:
•
You cannot skip frequencies during WX service
search.
search.
•
Search skip frequencies are shared by service
search, direct entry search, chain search, and
Close Call modes. If skip frequencies are sent in
certain mode, the frequencies are also skipped
in other search modes and Close Call mode.
search, direct entry search, chain search, and
Close Call modes. If skip frequencies are sent in
certain mode, the frequencies are also skipped
in other search modes and Close Call mode.
To skip a frequency, press Func and L/O when the
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it is
not in hold.
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it is
not in hold.
Follow these steps to clear a single frequency from
skip memory so the scanner stops on it during a
search.
skip memory so the scanner stops on it during a
search.
1. Press Hold to stop the search.
2. Press Func +
or Func +
to select the
frequency.
L/O
appears.
3. Press Func + L/O.
L/O
disappears.
To clear all the skip frequencies at once while
searching or search hold, press Func then press
and hold L/O until the scanner beeps.
searching or search hold, press Func then press
and hold L/O until the scanner beeps.
Notes:
•
If you selected all frequencies to be skipped
within the search range, the scanner beeps 3
times and does not search.
within the search range, the scanner beeps 3
times and does not search.
•
If you select more than 50 frequencies to skip,
each new frequency replaces a frequency
previously stored, beginning with the first stored
frequency.
each new frequency replaces a frequency
previously stored, beginning with the first stored
frequency.