Справочник Пользователя для Honeywell International Inc. 9PGTPL-100A
Page 1007
1 Mar 2006
34-45-54
MAINTENANCE MANUAL
TPL-100A Processor / Part No. 940-0530-001
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
•
NO TCAS (NO DATA on some versions)
•
TD FAIL
•
TCAS FAIL.
(4) It self test results are not met, do the following:
(a) If PPI or dedicated display is used, check and record fault annunciation(s). For
Mode S transponder system and TCAS line maintenance troubleshooting
procedures, refer to Tables 1003 and 1004, respectively.
procedures, refer to Tables 1003 and 1004, respectively.
(b) In non-PPI or dedicated display aircraft, perform Mode S and MILACAS-FR
Processor self tests on the front of each unit for further clarification of the problem.
(5) In a dual Mode S-equipped aircraft, set the transponder selector on the transponder
control unit to 2 to test No. 2 transponder. Turn the function selector to TA for 10
seconds (minimum), then repeat.
seconds (minimum), then repeat.
CAUTION: REMOVE POWER PRIOR TO REPLACING A MODE S OR TCAS
SYSTEM COMPONENT. DAMAGE TO THE EQUIPMENT MAY
RESULT IF POWER IS NOT REMOVED.
RESULT IF POWER IS NOT REMOVED.