Справочник Пользователя для CalAmp 4230HBT
1/28/2015
LMU42x0 Hardware & Installation Guide PULS Wiki
https://puls.calamp.com/wiki/LMU42x0_Hardware_%26_Installation_Guide
22/47
4 Configuration and Activation
This section details how to quickly get an LMU42x0™ provisioned and configured to point at a specific server. It is
assumed that a PEG script has already been created and is being managed through LMU Manager or PULS™, the
CalAmp Maintenance System.
assumed that a PEG script has already been created and is being managed through LMU Manager or PULS™, the
CalAmp Maintenance System.
We are making three assumptions to simplify the setup process:
You have created, installed and configured an LM Direct™ Server to receive messages from the LMU
42x0™. (See LM Direct™ Reference Guide for details)
You are using the standard wiring harness from CalAmp and the serial port expansion harness.
You have created a HyperTerminal or Putty session.
You have contacted the CalAmp sales team regarding the network availability of the LMU42x0™.
This device may not be supported for all the carriers or networks listed in this section (CDMAVerizon,
CDMASprint, HSPA, GSM), for product availability consult the CalAmp sales team.
42x0™. (See LM Direct™ Reference Guide for details)
You are using the standard wiring harness from CalAmp and the serial port expansion harness.
You have created a HyperTerminal or Putty session.
You have contacted the CalAmp sales team regarding the network availability of the LMU42x0™.
This device may not be supported for all the carriers or networks listed in this section (CDMAVerizon,
CDMASprint, HSPA, GSM), for product availability consult the CalAmp sales team.
4.1 Quick Start General Config
All LMU42x0s™ must go through a common step during the configuration and provisioning process.
Specifically, this is pointing the LMU to your LM Direct™ server, either via IP or a URL.
Specifically, this is pointing the LMU to your LM Direct™ server, either via IP or a URL.
This configuration process is accomplished via a series of AT Commands:
1. Power up the LMU42x0™ and connect a serial cable from the LMU to your laptop
2. Open a terminal session to the LMU42x0™
3. Enter the address of the LM Direct™ server:
2. Open a terminal session to the LMU42x0™
3. Enter the address of the LM Direct™ server: