Manualsbrain.com
  1. Инструкции и руководства
  2. Бренды
  3. Sharp Corporation
  4. ZW0115B0001
  5. Справочник Пользователя

Справочник Пользователя для Sharp Corporation ZW0115B0001

Скачать
Страница из 45
30
E
You can enable starting of the connection software from a commercially available USB flash drive.
USB flash drives that can be used:
•  USB flash drives indicated on page 5 with a capacity of 128 MB or more.
•  Use a USB flash drive in which nothing is saved.
1.  Insert the USB flash drive into the USB port of the wireless controller.
2.  Touch “Setup” (
) in the home screen of Wireless mode.
3.  Touch “Make Token”.
Making starts.
4.  When the making completed message appears, remove the USB flash drive.
Caution
•  Do not remove the USB flash drive while making is in progress.
  Do not turn off the power of the monitor.
•  Always create this on the wireless controller.  
Incorrect operation will result if you make from the wireless token to the USB flash drive using your computer.
TIPS
•  When the USB flash drive connection software is started, the software will automatically connect to the wireless controller on 
which the token was created. (The software will also connect automatically over wireless LAN.)
Starting from a commercially available  
USB flash drive