Справочник Пользователя для Sharp Corporation HRO00172

is16sh_e_03.fm
[42/43]

A

f (hold down for at least 2 seconds).

A

f (hold down for at least 2 seconds).

B

[[OK].

Turn off the product once and restart.

A

f (hold down for at least 2 seconds).

B

[[OK].

If you press 

f or no operation is made for a specified time, the 

screen is turned off temporarily, and then sleep mode is set.

■ Disabling Sleep Mode

A

f while sleep mode is set.

◎ If you use the microUSB cable to charge the battery pack, it may take the 

battery pack longer to be fully charged than if you use the specified AC 
adapter (sold separately).

◎ The product supports two microUSB plug shapes.
◎ Turn the protruding side of the microUSB plug up and insert the microUSB 

plug to the external connection jack of the product straightly. Inserting the 
microUSB plug in the wrong direction may result in damage to the external 
connection jack of the product.

◎ The product is turned on when it is connected while the power is turned off.
◎ If you charge the battery pack when the battery has run out, the charging/

incoming indicator may not illuminate. In such case, use the specified AC 
adapter (sold separately) for charging.

◎ The initial setting of the touch panel will be executed until “AQUOS 

PHONE” disappears from the screen after the power is turned on. Do not 
touch the screen, otherwise touch panel operations may not be performed 
properly.

◎ In some applications in use, the screen which was displayed before sleep 

mode is set may be displayed when sleep mode is disabled.

◎ Do not touch the screen when you disable sleep mode. Otherwise touch 

panel operations may not be performed properly.

is16sh_e.book  42 ページ  ２０１２年６月１日　金曜日　午後８時４７分