Справочник Пользователя для Telrad Networks Ltd COMPACT2X
Chapter 3 - Operation and AdministrationGPS Menu
Chapter 3: Operation and Administration
GPS Menu
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BreezeCOMPACT System Manual
BreezeCOMPACT System Manual
93
3.9.1.14
Stop Date
When Daylight Saving is enabled, this parameter defines the date for ending the daylight-savings feature (Advance Hour
Factor hours after midnight at the end of this day).
Use the format dd.mm to define the date and month at which to end activating the daylight-savings feature.
A change in the Stop Date takes effect after the next reset.
3.9.2
Inventory & Statuses
The Inventory & Statuses menu, enables you to view the read-only properties and status parameters describes below.
3.9.2.1
Signal Processor SW Version
The software version of the signal processor of the GPS receiver (if GPS is used and is operating properly).
3.9.2.2
Number Of Satellites
The number of satellites currently acquired by the GPS receiver (if GPS is used and is operating properly).
3.9.2.3
External 1PPS failure
The status of the External 1PPS clock received from the GPS receiver, when synchronized if a GPS receiver is used.
3.9.2.4
4 Satellites and More
This parameter indicates whether 4 (the minimum required for initial synchronization) or more satellites are received by the
GPS receiver (if GPS is used and is operating properly).
3.9.2.5
2 Satellites and More
This parameter indicates whether 2 (the minimum number required for maintaining synchronization after establishing initial
synchronization) or more satellites are received by the GPS receiver (if GPS is used and is operating properly).
3.9.2.6
GPS Communication Failure
This parameter indicates the status of communication with the GPS receiver (if GPS is used and is operating properly).
3.9.2.7
Hold Over Entered
This parameter indicates whether the device has entered into Hold Over state.