Справочник Пользователя для Honeywell International Inc. KHF1050
2. Press the FUNC button until transmit
power is selected, denoted by the P and a
value in the lower part of the display as
shown in Figure 13.
power is selected, denoted by the P and a
value in the lower part of the display as
shown in Figure 13.
3. Turn the right inner or outer knob to
select the desired transmitter power out-
put.
select the desired transmitter power out-
put.
4. Select any other function to exit.
DATA COMMUNICATIONS
The KHF 1050 System will transmit and receive data, such as fax trans-
missions, etc. Data communication requires an external modem be
installed with the system.
missions, etc. Data communication requires an external modem be
installed with the system.
Before transmitting or receiving data, select the appropriate Mode (USB
D, LSB D or possibly AM) as previously discussed in Mode Selection.
Check the requirements of the desired station.
D, LSB D or possibly AM) as previously discussed in Mode Selection.
Check the requirements of the desired station.
Revision 0 Mar/2003
KHF 1050/PS440 Pilot’s Guide
13
Figure 13
KHF1050 PG R0 3/21/03 3:22 PM Page 13