Справочник Пользователя для Honeywell International Inc. KSN770
Draft
Page 3-7
6 Dec 2012
34-70-06
SYSTEM INSTALLATION MANUAL
066-01204 / 066-01213
© Honeywell International Inc. Do not copy without express permission of Honeywell.
3.4
Position Interface
3.4.1
Applicable Part Numbers
All part numbers and software revisions perform all position interface functions.
3.4.2
Function
The position interface outputs allow moving map products (such as the EFIS 40/50, Aspen EFD, and
ARGUS 3000/5000/7000 series of products) and ELT products to use KSN 7xx position data. Position
is output as both RS-232 data and ARINC 429 data.
ARGUS 3000/5000/7000 series of products) and ELT products to use KSN 7xx position data. Position
is output as both RS-232 data and ARINC 429 data.
3.4.3
Requirements and Limitations
The position interface must be left open if there are no using units are connected to the KSN 7xx.
3.4.4
Electrical Characteristics
J1-62
GPS FLIGHT PLAN 232 TX
J1-42
GPS/AIRDATA/FUEL 232 GND
This serial data bus conforms to EIA RS-232 electrical characteristics. This bus outputs position
information, which also includes (but may not be limited to) distance to go, groundspeed, time to go,
and flight plan waypoint data.
information, which also includes (but may not be limited to) distance to go, groundspeed, time to go,
and flight plan waypoint data.
J1-71
GPS GAMA 429 TX A
J1-51
GPS GAMA 429 TX B
This serial data bus conforms to ARINC 429 electrical characteristics, and is configured for low
operating speed.
operating speed.
J1-63
LEGACY PXPRESS 232 TX
J1-43
LEGACY PXPRESS 232 GND
This serial data bus conforms to EIA RS-232 electrical characteristics, and may be configured for speed
on the maintenance pages.
on the maintenance pages.
3.4.5
Interconnect Diagram
Refer to Figure 3-2 for the position interface interconnect diagram.
Draft as of 10/15/2012