Справочник Пользователя для iLuv Creative Technology 001ZEAL-C02
ZEAL-C02 User’s Manual
Copyrightc All rights reserved by ADC Technology Inc.
Boot mode
ZEAL has four boot modes. These will be switched by the mode pin.
MODE0
MODE0
MODE0
MODE0
MODE1
MODE1
MODE1
MODE1
Nomal boot mode
HIGH
HIGH
Pre-settings value boot mode LOW
HIGH
Automatic boot mode
HIGH
LOW
Firmware rewrite boot mode
LOW
LOW
Nomal mode
This mode is start in command state with the default settings.
*9600bps, 8bit, non parity, 1stopbit
Pre-setting value boot mode
This mode is start in command state with the pre-settings.
Automatic boot mode
This mode is start in the master or slave with the pre-setting.
Firmware rewrite boot mode
This mode is used when test or firmware rewriting.