Справочник Пользователя для Multi-Tech Systems 92U09J14828
Part 1
Universal Socket Connectivity
Chapter 1 – Universal Socket Connectivity
Multi-Tech Systems, Inc. Universal Socket Hardware Guide for Developers (S000342P)
41
Analog Labeling Requirements
United States Labeling Requirements (for Dial-Up Modems)
Telecom requirements apply to analog products only.
Approved terminal equipment and approved protective circuitry shall prominently display the following
information using the format shown below:
information using the format shown below:
Responsible party or manufacturer
Product Identification
Equipment Code
Ringer Equivalence
Ringer Type
Indication that the product meets the requirements of FCC Part 68
The information required by the first five items shall correspond to the records in the ACTA (America's Carriers
Telecommunications Association) database of approved equipment. The required information shall be encoded
in the following format:
Telecommunications Association) database of approved equipment. The required information shall be encoded
in the following format:
US: AAAEQ##TXXX
Where:
US: Is a fixed field that indicates the equipment meets all requirements of 47 CFR Part 68, including the
requirements published by ACTA (America's Carriers Telecommunications Association).
US: Is a fixed field that indicates the equipment meets all requirements of 47 CFR Part 68, including the
requirements published by ACTA (America's Carriers Telecommunications Association).
AAA is the responsible party’s Grantee Code obtained previously from the FCC’s Common Carrier Bureau or
currently from ACTA.
currently from ACTA.
EQ Is an Equipment Code indicating to the Service Provider any special signal handling or billing requirements.
The Equipment codes are listed in Annex A (normative).
The Equipment codes are listed in Annex A (normative).
## is the Ringer Equivalence Number without a decimal point (e.g. REN of 1.0 = 10, REN of 0.3 = 03). In the
case of a “Z” ringer, ZZ shall appear. In the case of approved equipment without a network interface and
equipment not connecting to circuits with analog ringing supplied then “NA” shall appear.
case of a “Z” ringer, ZZ shall appear. In the case of approved equipment without a network interface and
equipment not connecting to circuits with analog ringing supplied then “NA” shall appear.
T is the ringer type letter associated with the Ringer Equivalence Number, in accordance with the technical
requirements. In the case of approved equipment without a network interface and equipment not connecting to
circuits with analog ringing supplied, the letter “N” shall appear.
requirements. In the case of approved equipment without a network interface and equipment not connecting to
circuits with analog ringing supplied, the letter “N” shall appear.
XXX Is a product identifier, unique when combined with the responsible party’s Grantee Code, of at least one
and up to nine alphanumeric characters (including one or more dashes (-) if desired. A dash shall not appear as
the first or last character nor shall the identifier consist entirely of dashes). The responsible party shall define
this identifier.
and up to nine alphanumeric characters (including one or more dashes (-) if desired. A dash shall not appear as
the first or last character nor shall the identifier consist entirely of dashes). The responsible party shall define
this identifier.
Label Physical Characteristics
The information required above shall be permanently affixed and legible without magnification. It may be
etched, engraved, stamped, indelibly printed, or otherwise permanently marked. Alternatively, the required
information may be permanently marked on a nameplate of metal, plastic or other material fastened to the
enclosure by welding, riveting or with a permanent adhesive. Such a nameplate shall be able to last for the
expected lifetime of the equipment and shall not be readily detachable.
etched, engraved, stamped, indelibly printed, or otherwise permanently marked. Alternatively, the required
information may be permanently marked on a nameplate of metal, plastic or other material fastened to the
enclosure by welding, riveting or with a permanent adhesive. Such a nameplate shall be able to last for the
expected lifetime of the equipment and shall not be readily detachable.
Labeling Continuity and Changes
The labeling content and format requirements in effect when a product was approved shall be effective for
the life of the product. The labeling content and format requirements in effect at approval shall also continue
to be effective for modified products. However, the responsible party shall have the option of conforming a
product's labeling to current content and format requirements at any time.
the life of the product. The labeling content and format requirements in effect at approval shall also continue
to be effective for modified products. However, the responsible party shall have the option of conforming a
product's labeling to current content and format requirements at any time.
Other Label Requirements
The label shall be placed in one of the following locations in a location where it can be found after
installation:
installation:
on an outside surface
inside a readily available access door or panel
on another readily accessible surface
For example, the label should not be placed on the rear of a permanently wall-mounted device in a manner
such that it is not readily accessible.
such that it is not readily accessible.