Справочник Пользователя для Motorola Solutions Inc. 89FT5803

Turn the radio on by rotating the volume 
control clockwise. The radio goes through a 
power-up self check and, if it passes the 
check, a good-power-up, high-pitched tone 
sounds to indicate that the radio has passed 
the self check.

If the radio fails the self check, a bad-power-
up, low-pitched tone will be heard. Turn the 
radio off, check the battery, and turn the radio 
back on. If the radio still does not pass the self 
check, a problem exists in the radio. Contact 
your authorized Motorola dealer.

Place the loop (attached to the side con-
nector cover) over the antenna; then slide it 
downward until it touches the top of the 
radio.

Insert the tab on the top of the cover into 
the slot above the connector.

Position the cover over the connector and 
align the thumbscrew with the threaded 
hole in the radio.

Tighten the thumbscrew to hold the cover in 
place. Do not overtighten the thumbscrew.

Loop

Slot

Thumbscrew

Antenna