Справочник Пользователя для Motorola Solutions Inc. 89FT5822
5
Activating Service
2 Remove the battery by pushing the battery toward
the antenna and lifting it out.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
per day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If long
term storage is required, store at half capacity.
term storage is required, store at half capacity.
Activating Service
The first time you power on your phone, you must be
in your local calling area. This activates your
service.
in your local calling area. This activates your
service.
Powering On
The first time you power your phone on, screen may
appear asking you to update your browser
information. This means you must enable security.
appear asking you to update your browser
information. This means you must enable security.
To power your phone on:
1 Extend the antenna.
2 Press
2 Press
p
.
3 If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See “Entering the PIN” on page 11.
Press
Press
A
under Ok.
Note: When you receive your phone, the SIM PIN
is 0000. Change your PIN to prevent
fraudulent use of the SIM card (see
“Changing the PIN” on page 11).
fraudulent use of the SIM card (see
“Changing the PIN” on page 11).