Справочник Пользователя для Motorola Solutions Inc. 89FT7096

If there are no active Bluetooth devices being paired
or connected, the display shows No devices.

5 Perform one of the following actions:

• To clear the device from the list, 

 or 

 to the

required device, press the Menu Select button
directly below Clr.

• To exit from this function, press the Menu Select

button directly below Back to return to the
previous screen without deleting the device
name.

If Clr is selected, the display shows <Device
Friendly Name> clear?.

6 Press the Menu Select button directly below Yes or

No to proceed delete the device or to exit this
function and return to previous screen.

If the device is deleted successfully, the display shows
<Device Friendly Name> cleared to indicate clearing is
successful.
If the device is not deleted successfully, you hear the radio
sounds a short, low-pitched tone. The display shows
<Device Friendly Name> clear failed. The display
returns to previous screen.

NOTICE:
If Re-Pair Timer is set to infinite and you clear keys
on the radio, you must clear keys on all previously
paired devices as well. (Please see your
Accessories manual for further details.)

Do one of the following to clear all Bluetooth devices
information. You can use the options interchangeably
depending on your preference and the programmed
functions.

• Clearing all Bluetooth devices information using the

preprogrammed Bluetooth On/Off button:

a. Long press the preprogrammed Bluetooth

On/Off button.

You hear a short, medium-pitched tone. The
display shows Please wait to indicate clearing is
in progress.

If successful, the display shows All BT devices
cleared.