Справочник Пользователя для Canon K30254

Troubleshooting

*1 To resume printing, you can press the RESUME/CANCEL button on the printer instead of selecting Continue.

*2 The waste ink absorber absorbs ink used during cleaning, for example. If this message appears, you will need to call for 

servicing to replace the absorber and to check the printer for proper operation.

Low ink level

It is about time to replace the 
ink tank with a new one

Slow flashing (about three second in red) of an ink tank lamp 
indicates that ink in this tank is low. Prepare a new ink tank.
Select Continue

*1

 in the display on your camera to resume 

printing.

No ink

The ink tank may not be 
installed properly (Printer 
ALARM lamp flashes orange 
four times/Ink tank lamp is 
off)

Install the appropriate ink tank.

The ink has run out (Printer 
ALARM lamp flashes orange 
four times/Ink tank lamp 
flashes fast (at about one 
second interval))

Replace the ink tank, and close the Top Cover.
If printing is in progress and you want to continue printing, 
select Continue

*1

 in the display on your camera with the ink 

tank installed. Then printing can continue under the ink out 
condition. Replace the empty ink tank immediately after the 
printing. The printer may be damaged if printing is continued 
under the ink out condition.

If multiple ink tank lamps are flashing, check how 
fast they flash. Fast flashing (at about one second 
interval) indicates the ink is empty. Slow flashing 
(at about three second interval) indicates ink is 
low. For details on different flashing speeds, see 

Some ink tanks are not 
installed in place, or more 
than one ink tanks of the 
same color are installed 
(Printer ALARM lamp flashes 
orange seven times/Ink tank 
lamp flashes fast (at about 
one second interval))

Confirm that the ink tanks are installed in the appropriate 
positions.
See 

The ink tank may not be 
compatible with this printer 
(Printer ALARM lamp flashes 
orange fourteen times/Ink 
tank lamp is off)

Install the appropriate ink tank.

Ink Error/No ink

An ink tank that was once 
empty is installed (Printer 
ALARM lamp flashes orange 
thirteen times)

Replace the ink tank.
Printing under the situation may damage the Print Head. Canon 
shall not be liable for any printer malfunction or damage caused 
by refilled ink tanks. 
If you want to continue printing with the refilled ink tank 
installed, press and hold the RESUME/CANCEL button for at 
least five seconds, and then release it. Using refilled ink tanks 
are memorized.
*

This operation will release the function for detecting the 
remaining ink level.

Hardware Error/No ink

Ink tank errors have occurred 
(Printer ALARM lamp flashes 
orange fifteen times)

Replace the ink tank.

Printer error

An error requiring servicing 
might have occurred (Printer 
POWER lamp flashes green 
and ALARM lamp flashes 
orange alternately)

Disconnect the cable between the printer and the camera, turn 
off the printer, and unplug the power cord of the printer from 
the power supply. After a while, plug the power cord of the 
printer back in, turn on the printer, and then reconnect the 
camera to the printer.
If the same error occurs, contact the Customer Care Center.

iP5200R_QSG_US.book  Page 83  Friday, May 20, 2005  1:58 PM