Справочник Пользователя для Nautel Maine Inc VS300
VS300 Operations and Maintenance Manual
Operating the transmitter
Issue 0.1 2011-03-11
Page 2-91
View digital outputs on the front panel display
To view the status of digital outputs 1 through 16 on the front panel display, select
User Settings ->
Remote I/O -> Remote Outputs
from the
Main Menu
(see
Figure 2.73
).
Figure 2.82: Remote Outputs Screen (Output 1 shown)
Use the up and down buttons to scroll through the remote outputs. These outputs correspond to the
remote outputs set through the remote AUI . The screen is for viewing purposes only. It contains the
output number (1 through 16) and name, a logic description of the output’s active state (e.g., “RF
On = Low” or “Active High”) as well as the current logic state of the associated output pin. Press
cancel (
remote outputs set through the remote AUI . The screen is for viewing purposes only. It contains the
output number (1 through 16) and name, a logic description of the output’s active state (e.g., “RF
On = Low” or “Active High”) as well as the current logic state of the associated output pin. Press
cancel (
X
) to return to the previous menu.
Analog outputs
There are four analog outputs that can be remotely monitored. These outputs are factory defined and
are not user configurable. Refer to the VS300 Pre-Installation Manual for a list of these analog outputs.
are not user configurable. Refer to the VS300 Pre-Installation Manual for a list of these analog outputs.