Справочник Пользователя для Nautel Maine Inc VS300
VS300 Operations and Maintenance Manual
Operating the transmitter
Issue 0.1 2011-03-11
Page 2-95
Configure test signal generator
From the front panel UI, you can configure the test signal generator output of the VS300. Note that
a different menu will appear depending on the currently configured test signal type. To view the
a different menu will appear depending on the currently configured test signal type. To view the
Signal Gen
screen, select
User Settings -> Signal Gen
from the
Main Menu
(see
Figure 2.86
).
Figure 2.86: Signal Generator Menus
Use the up and down buttons to move the cursor to the desired line item and then press the right
button to enable editing.
button to enable editing.
Figure 2.87 on page 2-96
shows all possible editing screens for the
Signal Gen
menu. Within any of
the editing screens, use the up and down buttons to edit the setting. Press the accept (checkmark)
button to save the change. Press cancel (
button to save the change. Press cancel (
X
) to discard changes and return to the previous menu.
Note:
The test signal generator function is only available using the front panel display.
Displayed when Type
is set to Sine Wave
is set to Sine Wave
Displayed when Type
is set to Sine Sweep
is set to Sine Sweep
Displayed when Type
is set to Bandlimited Noise
is set to Bandlimited Noise