Справочник Пользователя для UTC Fire & Security Americas Corporation Inc 785B-ALGRO
10
Allegro
Preliminary 2/5/02
Downloader (1st Tier)
Codes (1st Tier)
Number
(Downloader)
2nd Tier
(Default = none, Parameters = 24 digits; 0-9, *, #, pause) Use
this setting to enter the phone number of an off-site computer
that can be used to program the panel through the phone line.
Phone numbers can be 1 to 24 digits long, including pauses or
* and # characters (see Number 1 and 2 (Phones—Phone 1
and Phone 2) on page 7).
this setting to enter the phone number of an off-site computer
that can be used to program the panel through the phone line.
Phone numbers can be 1 to 24 digits long, including pauses or
* and # characters (see Number 1 and 2 (Phones—Phone 1
and Phone 2) on page 7).
Note
The phone numbers are not accessible if a Dealer Code is
programmed and the Installer Code is used to enter
installer programming mode. To access these numbers
when a Dealer Code is programmed, you must enter
installer programming mode using the Dealer Code.
The phone numbers are not accessible if a Dealer Code is
programmed and the Installer Code is used to enter
installer programming mode. To access these numbers
when a Dealer Code is programmed, you must enter
installer programming mode using the Dealer Code.
Note
For this feature to work, the DTIM must be connected to a
phone line with a Downloader phone number, and with a
Downloader code.
For this feature to work, the DTIM must be connected to a
phone line with a Downloader phone number, and with a
Downloader code.
Note
Call-waiting services should be disabled to prevent inter-
rupting panel communication to the downloader. To pro-
gram a dialing prefix that disables call-waiting, see the Pre-
dial String setting on page 8.
Call-waiting services should be disabled to prevent inter-
rupting panel communication to the downloader. To pro-
gram a dialing prefix that disables call-waiting, see the Pre-
dial String setting on page 8.
To program a downloader number:
Enter 1-24 digit number and then press #.
DL Code
(Downloader)
2nd Tier
(Default = 12345, Parameters = 5 digits; 0-9) The 5-digit
downloader code is used in conjunction with downloader
programming. The downloader operator must have the panel
account number, dealer code, and downloader code in order to
perform any programming.
downloader code is used in conjunction with downloader
programming. The downloader operator must have the panel
account number, dealer code, and downloader code in order to
perform any programming.
Note
The Downloader Code cannot be deleted from panel mem-
ory. To change the Downloader Code to its default setting,
enter 12345 when programming the Downloader code.
The Downloader Code cannot be deleted from panel mem-
ory. To change the Downloader Code to its default setting,
enter 12345 when programming the Downloader code.
To program a downloader code:
Enter 5-digit code and then press #.
Install Code
(Codes)
2nd Tier
(Default = 4321, Parameters = 4 digits; 0-9) The 4-digit
installer code is used for entering program mode and changing
system settings. If a dealer code is programmed, all settings
except phone numbers, pre-dial string, and downloader
number and dealer code can be changed.
installer code is used for entering program mode and changing
system settings. If a dealer code is programmed, all settings
except phone numbers, pre-dial string, and downloader
number and dealer code can be changed.
To change an installer code:
Enter 4-digit code and then press #.
Dealer Code
(Codes)
2nd Tier
(Default = none, Parameters = 4 digits; 0-9) The 4-digit dealer
code is used to prevent unauthorized persons from changing
the programmed central station phone numbers. When this
feature is enabled, central station phone numbers, pre-dial
string, and downloader phone number cannot be changed
(unless you enter the program mode by using the dealer code).
All other system settings are still accessible by entering
program mode with the installer code.
code is used to prevent unauthorized persons from changing
the programmed central station phone numbers. When this
feature is enabled, central station phone numbers, pre-dial
string, and downloader phone number cannot be changed
(unless you enter the program mode by using the dealer code).
All other system settings are still accessible by entering
program mode with the installer code.
Note
When memory is cleared the dealer code will not be
deleted from panel memory.
When memory is cleared the dealer code will not be
deleted from panel memory.
If a dealer code has already been programmed into the
system, use that code to change the dealer code.
system, use that code to change the dealer code.
To program a dealer code:
Enter 4-digit code and then press #.
To delete a dealer code:
Press # twice, once to delete code and then again to
accept the command.
Duress Code
(Codes)
2nd Tier
(Defaults = none, Parameters = 4 digits; 0-9) The duress code
is a unique 4-digit access code that allows users to operate the
system and, at the same time, instructs the panel to send a
silent alarm report to the central station.
is a unique 4-digit access code that allows users to operate the
system and, at the same time, instructs the panel to send a
silent alarm report to the central station.
To program a duress code:
Enter 4-digit code and then press #.
Apartment Manager
(Codes)
2nd Tier
(Default = none, Parameters = 4 digits; 0 to 9) The apartment
manager code functions the same as the primary code within
the user programming menu, and can arm or disarm the
system.
manager code functions the same as the primary code within
the user programming menu, and can arm or disarm the
system.
To program apartment manager code:
Enter 4-digit code and then press #.
To delete the apartment manager code:
Press # twice, once to delete code and then again to
accept the command.