Справочник Пользователя для UTC Fire & Security Americas Corporation Inc 787E-SIMON
12
Programming
Deleting Sensors
X-10 Module Operation
Use the following procedure to program X-10 module opera-
tions into panel memory. Notice that the Light Control button
is used to program all X-10 module operations (light, appli-
ance, and universal).
tions into panel memory. Notice that the Light Control button
is used to program all X-10 module operations (light, appli-
ance, and universal).
Numbered Options
Numbered options let you customize system operation accord-
ing to dealer and user needs.
ing to dealer and user needs.
The “Numbered Options” table in Appendix B lists all system
options and their characteristics. Fill in the last column of the
table before programming to help speed up the programming
process.
options and their characteristics. Fill in the last column of the
table before programming to help speed up the programming
process.
There are two ways to reach the desired option setting.
❑
Press Add or Delete, then press Option # repeatedly until
you hear the option you want changed.
you hear the option you want changed.
Or—
❑
Press Add or Delete, Option #, then enter the option num-
ber using the numbered keys.
ber using the numbered keys.
The following instructions use the last method.
Note
Although the panel voice prompts you through program-
ming, it is not necessary to wait for the complete mes-
sage before pressing the next button in the programming
sequence.
ming, it is not necessary to wait for the complete mes-
sage before pressing the next button in the programming
sequence.
To delete sensors:
1.
Press
Delete
. The panel announces “Select from Main
Menu.”
2.
Press Sensor/Remote repeatedly until you hear the name
and number you want deleted, then press DONE. The
panel announces that the sensor is deleted.
and number you want deleted, then press DONE. The
panel announces that the sensor is deleted.
To program the house code:
1.
Press
Add
.
2.
Press Light Control repeatedly until you hear the desired
house code letter.
house code letter.
3.
Press DONE.
4.
Set the HOUSE dial on each lamp, appliance, and univer-
sal module, to the same letter.
sal module, to the same letter.
5.
Set the HOUSE dial on powerhorn/remote sirens to the
next sequential alphabetical letter.
next sequential alphabetical letter.
To add an entry/exit activated module:
1.
Press
A
DD
.
2.
Press Light Control.
3.
Press Unit # repeatedly until you hear the unit number
that matches the one you chose for the module.
that matches the one you chose for the module.
4.
Press Entry/Exit Delay. The panel confirms your pro-
gramming.
gramming.
To add a sensor-activated module:
1.
Press
A
DD
.
2.
Press Light Control.
3.
Press Unit # repeatedly until you hear the unit number
that matches the one you chose for the module.
that matches the one you chose for the module.
4.
Press Sensors until you hear the sensor you want to con-
trol the light.
trol the light.
Note
A Keychain Touchpad button can also be programmed
to control a light or appliance module.
to control a light or appliance module.
5.
Press DONE. The panel confirms your programming.
To add a time-activated module:
1.
Press
Add
.
2.
Press Light Control.
3.
Press Unit # until you hear the unit number that matches
the one you chose on the module.
the one you chose on the module.
4.
Press Time.
5.
Press Hours and Minutes to set the beginning of the
schedule.
schedule.
6.
Press DONE.
7.
Press Hours and Minutes to set the end of the schedule.
8.
Press DONE. The panel confirms your programming.
To delete an Entry/Exit-activated module:
1.
Press
Delete
.
2.
Press Light Control.
3.
Press Unit # repeatedly until you hear the unit number
you want deleted.
you want deleted.
4.
Press Entry/Exit Delay, then press DONE. The panel
confirms your programming.
confirms your programming.
To delete a sensor-activated module:
1.
Press Delete.
2.
Press Light Control.
3.
Press Unit # repeatedly until you hear the unit number
you want deleted.
you want deleted.
4.
Press Sensors until you hear the one you want deleted.
5.
Press DONE. The panel confirms your programming.
To delete a time-activated module:
1.
Press Delete.
2.
Press Light Control.
3.
Press Unit # repeatedly until you hear the unit number
you want deleted.
you want deleted.
4.
Press DONE. The panel confirms your programming