Справочник Пользователя для Becker Avionics GmbH AR6203
Operating Instructions
Frequency Selection Modes
18
VHF Transceiver Family 620X
0638.420-071 Issue 03 July 2015
2.5.3.1.
Select/Deselect Channels:
Example:
With CH01 user channel shown on display:
In order to select the channel number:
•
The first turn clockwise in channel mode provides navigation
up user channels CH01 to CH99.
•
Make a short press of the "ROTARY ENCODER", or:
•
Make one clockwise turn of the "ROTARY ENCODER".
The channel number is now highlighted, the channel can be changed
turning the "ROTARY ENCODER". At each step the receiver tunes
immediately to the displayed frequency.
•
The first turn counter-clockwise will enter to the channel
"LAST 1.
The channel number is now highlighted and one of the nine last used
channels is selectable by turning the "ROTARY ENCODER" either counter
clockwise or clockwise.
The "LAST" mode is left automatically after a 5 second timeout or can be
The "LAST" mode is left automatically after a 5 second timeout or can be
deselected by repeated pressing of the "ROTARY ENCODER".
When leaving the "LAST" channel database and the last shown frequency
When leaving the "LAST" channel database and the last shown frequency
is not stored in the User channel database, "CH__" appear on the display.
Press "STO" to start the storage process.
Leave Channel Mode:
Press the "MDE" key the standard page appears.
2.5.4.
Frequency Storage Functions
Start store function by pressing:
•
"STO" key in "Standard Mode", "Direct Tune Mode" and "SCAN
Mode".
During this procedure, the display looks similar to the channel
mode with one difference that "STO" appears on the left side of the
display.
•
"ROTARY ENCODER" key in "Channel Mode"